Saturday, October 13, 2018

Battery Box Harness Part 3

In my last post I showed the first part of the hinge, next is the part that mounts to the battery box. This piece was made pretty much the same way as the first one.

I started with a piece of hardwood long enough to make all the parts and also the correct thickness. I laid out the shape of the part and then drilled the hole for the hinge pin. I also cut the width of the finished part using a bandsaw.


Next I used a drum sander to create the round over.


Next I cut the finished thickness on the band saw.



Finally I cut the piece from the piece of wood I started with.


No comments:

Post a Comment